we are planning to add one more link between two location for the backup. right now we have VSAt connection with 256 Kbps. we are already running OSPF between these two location. the problem is that we dont have enough ethernet interface to connect the new backup link at one side. the new link is coming through ethernet. hence we arranged one 2600 series router at one end and terminated the link to that port. we plan to run ospf in that 2600 router. can we still make vsat link as primary as ethernet link cost is 10 ? is the current plan ok or need to change the topology
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...