Here we had done redistribution of OSPF to RIP and viceversa in the router B and redistribution of Static to OSPF and vice versa in C.
So the same routes from A advertised through RIP and Static and through redistibution it is coming to the D and it is always prefering the traffic through D----C---A.Actually we want to take the routes through A_B_D.Please assist me to tweak the configuration to achieve the same.
Whenever we are redistributing the other routing protocol routes into OSPF, the default metric type is E2 and the cost is.so in your scenario, redistribute the static routes with metric type E1.obviously the cost will be bit high compare with RIP routes.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...