06-17-2007 06:31 AM - edited 03-03-2019 05:29 PM
Hi
Can any one tell me , why i am getting this msg on router only in OSPF
R1(config-router)#distribute-list 1 out serial 2/3
% Interface not allowed with OUT for OSPF
06-17-2007 07:02 AM
"You cannot specify an interface name in OSPF. When used for OSPF, this feature applies only to external routes."
06-17-2007 06:18 PM
Vinod
Edison makes a good point about specifying an interface name in OSPF distribute list. I would like to go a bit deeper about the use of distribute list in OSPF. Unlike routing protocols like EIGRP or RIP which do advertise routes, OSPF advertises LSAs. Since a distribute list filters advertisement of routes it is not effective in filtering of LSAs and can not assigned outbound on an interface.
HTH
Rick
06-17-2007 08:52 PM
also....
The command distribute-list out works only on the routes being redistributed by the Autonomous System Boundary
Routers (ASBRs) into OSPF. It can be applied to external type 2 and external type 1 routes, but not to intra-area
and interarea routes.
arun ..:)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide