Has anyone tried that? I tried it on 3640 with c3640-jsx-mz.124-25a.bin
and on 7206 VXR with c7200-k91p.122-25.S13.bin and it doesn't work. However, RIP and EIGRP are redistributed into MBGP without a problem (also connected and static). There is a workaround - to do it with network commands but that doesn't scale well. Anyone aware of a particular reason for that behavior? Checked the Bug Toolkit - nothing comes up. Documentation also does not mention any restrictions. Looks like neither a bug, nor a feature:)
Mystery partially solved. With IS-IS it's necessary to redistribute into Unicast BGP as well. Then the prefixes appear in the Multicast BGP table. However, with OSPF this doesn't work. If only somebody can give me a reasonable explanation why would someone code it this way...
[toc:faq]The ProblemOn traditional switches whenever we have a trunk
interface we use the VLAN tag to demultiplex the VLANs. The switch needs
to determine which MAC Address table to look in for a forwarding
decision. To do this we require the switch to do...
[toc:faq]Introduction:Netdr is a tool available on a RSP720, Sup720 or
Sup32 that allows one to capture packets on the RP or SP inband. The
netdr command can be used to capture both Tx and Rx packets in the
software switching path. This is not a substitut...
IntroductionOSPF, being a link-state protocol, allows for every router
in the network to know of every link and OSPF speaker in the entire
network. From this picture each router independently runs the Shortest
Path First (SPF) algorithm to determine the b...