OSPF Link State Updates - how often in a stable netwrok
Link State updates - how often should they occure. The text book says a link state update should occur only when a rotuer detects a missing piece in its database or when topology changes. This would mean to me then that in a stable network, link state updates should occure very infrequently. While playing with the "show ip traffic" command this morning I noticed one of the outputs to this was the following:
Rcvd: 9279 total, 0 checksum errors
7306 hello, 37 database desc, 12 link state req
1003 link state updates, 921 link state acks
Sent: 4948 total
3662 hello, 44 database desc, 7 link state req
945 link state updates, 294 link state acks
I've noticed that the link state updates counter is increasing.
Does this mean routing instability of some sort in my network? As I check around my network I do not see routes coming and going so I'd like to understand what those mean and if they are normal in a stable network.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...