Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ospf load balancing

hi

we are facing load balancing problem.

Details of network set up is given in attached msword document.

Any suggestions..

Thanks in advance

Subodh

1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Re: ospf load balancing

Hi

Try enabling per packet load balancing on the involved interfaces (seria&ethernet) on all the rotuers involved.

3 REPLIES
Cisco Employee

Re: ospf load balancing

Subodh,

Can you please post the config from both R1 and R3 and also "show ip route "

-amit singh

New Member

Re: ospf load balancing

Dear Mr. Singh,

all routers R1, R2, R3, and R 4 are all 7507 series routers having more that 800 rouets. SO i think it's practically difficult to caputre o/p or sh ip route. Can i post any particular routes , wherein router shows two paths of equal cost to destinations.

Pls. ack back.

( Also I will try per packet switching if possible as mentioned in second reply )

Thanks and Regards.

Subodh

New Member

Re: ospf load balancing

Hi

Try enabling per packet load balancing on the involved interfaces (seria&ethernet) on all the rotuers involved.

109
Views
0
Helpful
3
Replies