Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

dsc
New Member

OSPF logging

Without using debug, how can i log ospf lsa's etc. I know how to log the adj. changes.. what i want to see is the info in the lsa's and when and what they transmit and to whom.

4 REPLIES
Purple

Re: OSPF logging

Hi,

There is no such facility, I'm afraid. You can only log adjacency changes. There are some cisco-specific OSPF traps that you can enable, though:

snmp-server enable traps ospf cisco-specific errors config-error

snmp-server enable traps ospf cisco-specific errors shamlink [authentication [bad-packet [[config] | config [bad-packet]]

snmp-server enable traps ospf cisco-specific retransmit [packets [shamlink | virt-packets] | shamlink [packets | virt-packets] | virt-packets [shamlink]]

snmp-server enable traps ospf cisco-specific state-change [nssa-trans-change | shamlink [interface | interface-old | neighbor]]

Hope that helps - pls rate the post if it does.

Paresh

dsc
New Member

Re: OSPF logging

Thanks Paresh, I feared that, but was still hoping...

dsc
New Member

Re: OSPF logging

Hi Paresh,

I tried to enable the traps as per ure reply, but i do not see the ospf option in the list of available choices

my version is 12.2(17a)SX2

Purple

Re: OSPF logging

I'm afraid you'll need at least 12.3(5) for those features...

Paresh

117
Views
4
Helpful
4
Replies
CreatePlease to create content