Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

OSPF: LSA3 - summarisation to what ?

Hello

In area0 i have networks 10.0.1.0/24, 10.0.2.0/24 and 10.0.3.0/24 and 10.0.4.0/24. R1 is ABR between area0 and area1. What LSA type 3 will be send into area1 ? (what network and mask will be inside this LSA3?)

Thanx

1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

Re: OSPF: LSA3 - summarisation to what ?

Hi,

Four type 3 Lsa will be sent.One for each 10.0.1.0/24, 10.0.2.0/24 , 10.0.3.0/24 and 10.0.4.0/24 provided you are not using summarization on ABR.

Networks and mask inside the LSa will be following

1) 10.0.1.0 mask 255.255.255.0

2) 10.0.2.0 mask 255.255.255.0

3) 10.0.3.0 mask 255.255.255.0

4) 10.0.4.0 mask 255.255.255.0

Hope this answer your query

Regards

Ajay Kumar

2 REPLIES
Community Member

Re: OSPF: LSA3 - summarisation to what ?

Hi,

Four type 3 Lsa will be sent.One for each 10.0.1.0/24, 10.0.2.0/24 , 10.0.3.0/24 and 10.0.4.0/24 provided you are not using summarization on ABR.

Networks and mask inside the LSa will be following

1) 10.0.1.0 mask 255.255.255.0

2) 10.0.2.0 mask 255.255.255.0

3) 10.0.3.0 mask 255.255.255.0

4) 10.0.4.0 mask 255.255.255.0

Hope this answer your query

Regards

Ajay Kumar

Re: OSPF: LSA3 - summarisation to what ?

I believe it would depend upon what you provide under the command "area area-id range address mask" command on the ABR.

However I should be able to cross check that in the lab.

Any other experts?

Regards

wilson Samuel

PS: Please rate all helpful posts

151
Views
0
Helpful
2
Replies
CreatePlease to create content