Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

OSPF NBMA Config

Hai,

i wud like to configure ospf in NMBA ...(Frame-Relay) ....My quiestion is Without a Frame-Relay switch is this possible ...is this possible by connecting router back to back ....how can i perform this ....

I want to perform the live cenario in LAB ...Pls help me

Kindly hlp me ...

Thanks in advance ...

4 REPLIES
Silver

Re: OSPF NBMA Config

Hi There

How many routers do you have available to you.

You can make a Cisco router act as a Frame Switch. I use a 2520 with 4 serial ports as the Frame Switch in my home lab. I run a Frame Relay hub and spoke network with 1 hub router and 3 spoke routers.

If you don't have sufficient routers available, check out Dynamips. You could set up a virtual Frame Relay network using this software.

Best Regards,

Michael

New Member

Re: OSPF NBMA Config

Hai ,

Thanks for the reply ...i have 4 1721 router and one 2800 ...is it possible to make a lab using this ...i ve to check wheather i shud have enough WIC card ....wud be nice if you can pase the Frame-Relay switch config and Hub/Spoke router config ,...

Thanks

Lijesh.N.C

Hall of Fame Super Bronze

Re: OSPF NBMA Config

The following document describes how to configure back-to-back Frame Relay.

http://www.internetworkexpert.com/resources/backtoback-framerelay.htm

And, the following document describes how to build a compound high density Frame Relay switch by cascading multiple routers which have a low density of interfaces

http://www.internetworkexpert.com/resources/compound.frame-relay.htm

HTH,

__

Edison.

New Member

Re: OSPF NBMA Config

Hai

Thanks alot Edison .... i think it may take some time for me to arrange this ..setup ..any way i will do this ..thanks a lot onece again

Lijesh.N.C

144
Views
0
Helpful
4
Replies