Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

OSPF not coming up

Hi

I am facing problem related to OSPF

I am runing OSPF between 6 routers in area 0 with bfd support

for testing purpose i have executed shut command on one of the interface as expected teh OSPF stae changed to FULL To DOWN, but when interface made no shut interface came up ping also fine but OSPF doesn't come up still in DOWN

FYI I am using the IOS c7600s3223-advipservicesk9-mz.122-33.SRC4.bin"

Regards,

Nilesh

3 REPLIES
Hall of Fame Super Bronze

Re: OSPF not coming up

Make sure your MD5 authentication is up to snuff. Try removing MD5 and if OSPF comes up, re-key the MD5 string and must match - caveat on the space within the key.

__

Edison.

New Member

Re: OSPF not coming up

Tried same already but not improvement,

Can you guide further.

Regards,

Nilesh

Silver

Re: OSPF not coming up

1. Debug BFP

2. Try removing BFD

3. After turning on the following, do shut/no shut again.

Debug ip ospf adj

Debug ip ospf events

debug ip ospf packet

What's the state on the other side?

139
Views
0
Helpful
3
Replies