I have done research with using OSPF over a PIX to PIX tunnel and this seems to be a valid solution for me but I can find no examples that allow both locations to use it's own internet connection. All examples show a Lan to Lan connection which forces all communication across the link, to the main sites internet connection, basically the default gateway forces all communication through the VPN at the remote site. I want to be able to use OSPF to form neighbors/adjacencies throught he VPN but allow the remote location to have a default gateway to it's internet router to allow all traffic except that destined for the other LAN (ie. all OSPF learned routes) This doesn't seem possible since OSPF sees the remote location as a STUB area and will inject a default route based on OSPF learned routes.
Is there a way to stop OSPF from injecting a default route at the remote location? Will a default route on the remote locations PIX override an OSPF injected default route?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...