OSPF PPP links /32 subnet "area 0.0.0.0 : src not on the same network"
Hi to All,
Two PPP router links /32 subnet and the links see OSPF hello packets form each other.
The client complaints "Rcv pkt from xxx.x.137.65, Dialer2, area 0.0.0.0 : src not on the same network"
as there cannot be more than 1 host on a /32 network, OSPF will always complain that the remote peer is not in the same subnet (OSPF needs both the ends in the same network to form neighbour relationship).
As the dialer 2 interface has a /32 ip and the interface bound to the virtual-template can't be part of that /32 network what the solution to this would be ?
Re: OSPF PPP links /32 subnet "area 0.0.0.0 : src not on the sam
"ip address negotiated" under dialer interafce will use PPP IPCP for address negotiation. This doesnt have the option to negotiate subnet mask and so will have /32 as subnet on dialer interface. With this, OSPF cannot be enabled.
You may have to try "ip address dhcp" on dialer interface and configure the Server as DHCP server and a DHCP pool with subnet as non /32. This will solve your issue.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.