Can you explain .....I have a network running ospf ...on a boder router there is one static route configured when redistributing static route into ospf ...in neighbor routers i am not able to see the route .what could be the reason behind that.
It depends somewhat on what route you are redistributing and the exact syntax that you use to redistribute. If you would post the config of the router that is doing the redistribution we would be able to give you a better answer.
One thing that explains many times when routes are not redistributed is the failure to include the subnets parameter on the ODPF redistribute statement. Did you include the subnets parameter on your redistribute statement?
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...