Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

OSPF Routes are not showing on routing table

OSPF route is not comming on Routing table of 3925 routers.Diagram is as below

Lan1>>>>>>>>>>FW1---------------3925routerA==============3925routerB------------FW2>>>>>>>>>>Lan2

FW1 & RouterA are localy connected .RouterB & FW2 localy connected.Between 3925 router two P2P lease line UP & running.For Loadballance purpose

i have config OSPF on routerA & router B.Redistribite static & connected subnet has been configured.My problem is subnets on the Lan sides are not advertise by ospf routing table.Ospf configuration is as below.Since OSPF route is not comming on routing table i have configure default route pointed to routerB & vice versa.And configured static routes on routerA/B pointed to FW1 for Lan subnets.

Currently traffic are flowing through Default & static routes.

I would like to configure cost 1 for wan interfaces so packet will get ballance.

Please help why subnets are not comming on the routing table,On what i need to concentrate.

Thanks

Everyone's tags (3)
3 REPLIES
New Member

OSPF Routes are not showing on routing table

Hi Dhruba,

I have checked for 10.11.30.0 & 10.11.40.0 which are presented in Site B & u have distributed it in ospf .

These routes are learning through ospf in Site A.

Link ID         ADV Router      Age         Seq#       Checksum Tag

10.11.30.0      10.178.7.2      1987        0x8000005E 0x00AD9C 0

10.11.30.0      10.178.7.6      485         0x8000005F 0x0093B1 0

10.11.40.0      10.178.7.2      1987        0x8000005B 0x0045FD 0

10.11.40.0      10.178.7.6      485         0x8000005F 0x002516 0

You can remove static routes from site A & check it in routing table. It should comes in routing table if not, Pl's provide output of  show ip ospf database router 172.178.7.6 from site A

Regard's

Surya

New Member

OSPF Routes are not showing on routing table

HI Surya

Its means that from both end router, i need to remove Default & static routes.

I cant remove the routes now.I need to take downtime.& then i will revert you.

Thanks for your valuable inputs.

Regards

Dhruv

New Member

OSPF Routes are not showing on routing table

Done..Thanks Suriya.

I ma late to reply....

Thank u .....

1364
Views
0
Helpful
3
Replies