Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

OSPF - routes in DB but not going into routing table ?

I have a new OSPF connection to an external business partner. The OSPF

adjacency is FULL/DR and I can see LSA in database but nothing in the route table.

I have tried different OSPF network types but nothing works. I've looked at the Cisco doc here

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a008009481a.shtml

Still at a loss - any ideas guys ?

interface FastEthernet0/0

ip address 1.0.2.28 255.255.255.0

ip ospf 1 area 0

router ospf 1

log-adjacency-changes

network 1.0.0.0 0.255.255.255 area 0

r02#show ip ospf neighbor

Neighbor ID Pri State Dead Time Address Interface

1.255.0.48 10 FULL/DR 00:00:39 1.0.2.1

FastEthernet0/0

r02#show ip route ospf

r02#

r02#show ip ospf database route

OSPF Router with ID (192.168.250.218) (Process ID 1)

Router Link States (Area 0)

Adv Router is not-reachable

LS age: 439

Options: (No TOS-capability, DC)

LS Type: Router Links

Link State ID: 1.0.1.3

Advertising Router: 1.0.1.3

LS Seq Number: 8000481B

Checksum: 0xC6DF

Length: 48

AS Boundary Router

Number of Links: 2

Link connected to: a Transit Network

(Link ID) Designated Router address: 1.0.1.3

(Link Data) Router Interface address: 1.0.1.3

Number of TOS metrics: 0

TOS 0 Metrics: 1

Link connected to: a Stub Network

(Link ID) Network/subnet number: 1.1.1.0

(Link Data) Network Mask: 255.255.255.0

Number of TOS metrics: 0

TOS 0 Metrics: 1

Thanks in advance

3 REPLIES
Hall of Fame Super Bronze

Re: OSPF - routes in DB but not going into routing table ?

Take a moment and read the output carefully, ok let me help you:

r02#show ip ospf database route

OSPF Router with ID (192.168.250.218) (Process ID 1)

Router Link States (Area 0)

Adv Router is not-reachable

LS age: 439

Options: (No TOS-capability, DC)

LS Type: Router Links

Link State ID: 1.0.1.3

Advertising Router: 1.0.1.3

LS Seq Number: 8000481B

Checksum: 0xC6DF

Length: 48

AS Boundary Router

Number of Links: 2

HTH,

__

Edison.

Community Member

Re: OSPF - routes in DB but not going into routing table ?

Hey,

Why was I asking in the first place ?

Thanks Edison you really nailed it there mate.

D

Community Member

Re: OSPF - routes in DB but not going into routing table ?

do you have reachabilty to the DR? if not I would start there.

281
Views
5
Helpful
3
Replies
CreatePlease to create content