Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

OSPF Routing Protocol

Hi,

I configured the OSPF as shown on the diagram in the attachment.


Senorio 1: All the ports on the switch initally on default VLAN and there was no problem in OSPF neigbour formation.

Senorio 2: I confiured the 2 different netwrok on 2 different VLAN. I though the OSPF Neibour will fail because there is no routing between the VLAN. But the neibour formation was successful. i even reload the routers.

My question is how did the routing protocols were excanged between the 2 Broadcast domain (i.e. Between 2 VLAN) when there is no routing between the 2 broadcast domain.

Regards

Logesh

5 REPLIES
Hall of Fame Super Blue

Re: OSPF Routing Protocol

Logesh

Can't read your attachments. Could you just post the configs + a jpg/png of the setup.

Jon

New Member

Re: OSPF Routing Protocol

Hi,

Please find the diagram in the attachment and below is the configuration

R1: Configuration

interface FastEthernet0/0
ip address 172.30.49.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 10.1.14.1 255.255.255.252
duplex auto
speed auto
shutdown
!
router ospf 1
log-adjacency-changes
network 172.30.49.0 0.0.0.255 area 0
network 10.1.14.0 0.0.0.3 area 0


R4: Configuration

!
interface FastEthernet0/0
ip address 172.30.50.4 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 10.1.14.2 255.255.255.252
duplex auto
speed auto
!
router ospf 1
log-adjacency-changes
network 172.30.50.0 0.0.0.255 area 0
network 10.1.14.2 0.0.0.0 area 0
!

R3: Configuration

!
interface FastEthernet0/0
ip address 172.30.50.3 255.255.255.0
duplex auto
speed auto
!
router ospf 1
log-adjacency-changes
network 172.30.50.0 0.0.0.255 area 0
!

R2: Configuration

!
interface FastEthernet0/0
ip address 172.30.50.2 255.255.255.0
duplex auto
speed auto
!
router ospf 1
log-adjacency-changes
network 172.30.50.0 0.0.0.255 area 0
!

Senorio 1: Switch configuration

hostname Switch
!
!
!
interface FastEthernet0/1
description toR4
!
interface FastEthernet0/2
description toR3
!
interface FastEthernet0/3
  description toR2
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
  description toR4
!
interface FastEthernet0/24
  description toR1

!
interface Vlan1
no ip address
shutdown
!


Senorio 2: Switch configuration

hostname Switch
!
!
!
interface FastEthernet0/1
description toR4
switchport access vlan2
!
interface FastEthernet0/2
description toR3
switchport access vlan2
!
interface FastEthernet0/3
  description toR2
  switchport access vlan2
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
  description toR4
  switchport access vlan3
!
interface FastEthernet0/24
  description toR1
  switchport access vlan3
!
interface Vlan 2
ip address 10.1.1.1 255.255.255.0
!
interface Vlan 3
ip address 10.2.2.2 255.255.255.0
!

Regards

Logesh

Hall of Fame Super Blue

Re: OSPF Routing Protocol

Thanks for that.

Can you post "sh ip ospf neighbors" from all routers.

Jon

Re: OSPF Routing Protocol

Logesh,

Did you use vlan SVI's on the switch and advertise the IP in OSPF ?

Please do a sh ip ospf neigh on the routers and paste it here..

New Member

Re: OSPF Routing Protocol

sh ip ospf neighbor

R1#sh ip ospf neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
172.30.50.4       0   FULL/  -        00:00:33    10.1.14.2       FastEthernet0/1


R4#sh ip os neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
172.30.50.2       1   FULL/DROTHER    00:00:39    172.30.50.2     FastEthernet0/0
172.30.50.3       1   FULL/BDR        00:00:34    172.30.50.3     FastEthernet0/0
172.30.49.1       0   FULL/  -        00:00:34    10.1.14.1       FastEthernet0/1

R2#sh ip ospf neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
172.30.50.3       1   FULL/BDR        00:00:35    172.30.50.3     FastEthernet0/0
172.30.50.4       1   FULL/DR         00:00:35    172.30.50.4     FastEthernet0/0

R3#sh ip ospf neighbor

Neighbor ID     Pri   State           Dead Time   Address         Interface
172.30.50.2       1   FULL/DROTHER    00:00:31    172.30.50.2     FastEthernet0/0
172.30.50.4       1   FULL/DR         00:00:36    172.30.50.4     FastEthernet0/0

2564
Views
0
Helpful
5
Replies