Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

OSPF Routing Protocol

To configure ospf routing protocol, it requires at least how many routers? 2 or 3 routers? Can provide me the sample configuration file?

3 REPLIES

Re: OSPF Routing Protocol

Hi Swee,

If you wanna see routes showing up, a minimum of two routers are required.

Connect two routers back to back and add some loopback interfaces to both the routers to simulate different networks and copy paste the below 3 lines on both of them

enable

config t

router ospf 1

network 0.0.0.0 255.255.255.255 area 0

end

Would recommend you to get a CCNA book and start looking into it for simpler explanations if you are new to ospf.

Re: OSPF Routing Protocol

-

Re: OSPF Routing Protocol

Hi Swee

OSPF is not having any limitation of router but atleast you need 2 router. This protocol is ment for small & Large or very large network.

And also having all those feature that req for an large network.

Please refer the below link to understand ospf and also please find the attach file to configure OSPF.

http://www.petri.co.il/how-to-configure-ospf-in-cisco-ios.htm

Regards

Chetan Kumar

228
Views
0
Helpful
3
Replies
CreatePlease to create content