Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

OSPF running b/n DC & branch VSAT links (32 kpbs which is shared)

       In one project Im having 1800 hundred branches , 1 DC & 1 DR. The branch connectivty is through VSAT link which is having a bandwidth of 32 kbps (Shared).

We are planning to run OSPF b/n DC,DR & branches. By making the branch as a stub, whether is it possible to run OSPF b/n DC & branch over GRE tunnel.

DC & DR we are using ASR1006 and in branch side we are using 1921 router. If some body can give me their inputs that should be very usefull for me.

1 REPLY

Re: OSPF running b/n DC & branch VSAT links (32 kpbs which is sh

yes you can run OSPF over a gre tunnel. Since you have limited bw and over a sat link, you would need to also consider using the on demand feature

http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094a8f.shtml

Sent from Cisco Technical Support iPad App

351
Views
0
Helpful
1
Replies
CreatePlease to create content