04-27-2010 11:35 AM - edited 03-04-2019 08:18 AM
Hi All,
I have a strange problem on our network with a router 7200 series having a P-2-P interfaces to other locations.
The interfaces went down and come back up but OPSF show state down, while sh ip int brief shows interfaces up.
Debug ip ospf show exchanging hellos but sh ip ospf int XX, indicated that no ospf traffic is passing through.
Will appreciate an urgent help to this regard.
Thanking you all in advance,
Olu
04-27-2010 12:22 PM
port the show run int xx and show int xx from both ends.
04-27-2010 12:35 PM
Hi,
Thanks for your reply. But what do you mean by "port the show run int xx and show int xx from both ends?".
Thanks,
Olu
04-27-2010 12:56 PM
Please furnish with configuration of OSPF and sho ip int ospf output for further diagnosis.
Sameer
04-27-2010 01:37 PM
xx means the interfaces that are directly connected b/w the devices on which you are running ospf.
for example
R1F0/0--------F0/0R2
show run int f0/0 (from R1 and R2)
show int f0/0 (from R1 and R2)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: