cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
277
Views
0
Helpful
2
Replies

OSPF two records with the same network but diferent cost

eq
Level 1
Level 1

Hi

I have a special condition and i need repair this sitiation...

i have a 6509 directly connect with cluster firewall checkpoint .. the firewall send to 6509 many networks to 6509 but 1 network appear 2 times in route table with the same next hop but diferent cost

161.131.163.0/25 [110/2] via 161.131.3.20, 00:10:21, Vlan60

[110/101] via 161.131.3.20, 1d08h, Vlan60

thanks

2 Replies 2

Kevin Dorrell
Level 10
Level 10

That is very unusual. Normally I would expect the [110/101] not to get into the routing table.

It would be interesting to see a show ip route 161.131.163.0 to see more detail about how they manage to be both in the routing table. I presume the entries have the same prefix and length. Also, it is not clear what sort of route they are: O, IA, E1, or E2.

You could try a clear ip route 161.131.163.0 255.255.255.128. That will reconstruct the live routing table from the underlying routing protocol, in this case OSPF.

If that doesn't do the trick, could you post a show ip ospf database?

Kevin Dorrell

Luxembourg

paul.matthews
Level 5
Level 5

As Kevin says, that is rather unusual! Was this a transient state, or did it remain like this for some time? Checking the OSPF LSA database would be good, but what version of IOS are you running? I would be tempted to look at the bug toolkit to see if this may be a known bug.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: