Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Output of sh int fa0/0 - throttle question

Is the throttle value above acceptable? The complaint is lagging internet and our network monitor does show them peaking at times...

Rtr has been up about 6 months...

Last clearing of "show interface" counters never

Input queue: 0/75/50/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

5 minute input rate 1045000 bits/sec, 156 packets/sec

5 minute output rate 337000 bits/sec, 139 packets/sec

1009124324 packets input, 3307816162 bytes

Received 0 broadcasts, 0 runts, 0 giants, 48 throttles

1 REPLY
Hall of Fame Super Gold

Re: Output of sh int fa0/0 - throttle question

Hi, your throttles value is minuscule compared to total input. Likely router has no fault, check your bandwidth usage, P2P, how yous ISP is doing, etc.

Hope this helps, please rate post if it does!

310
Views
5
Helpful
1
Replies