Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

PA-T3+= and NM-1T3/E3

I wanted to confirm if these cards PA-T3 for 7206 and NM-1T3/E3 for 3825 will work for frame ds3 with 30 meg of port speed and 6 meg of cir circuit,or are they for point to point DS3 only.

Any help is apprciated.

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: PA-T3+= and NM-1T3/E3

Appears both cards that you mentioned above support fractional DS3 and frame relay encapsulation.

Check out the following links:

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_module_installation_guide_chapter09186a008010b214.html

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_configuration_guide_chapter09186a008020eced.html

Pls. rate all helpful posts.

HTH,

Sundar

2 REPLIES

Re: PA-T3+= and NM-1T3/E3

Appears both cards that you mentioned above support fractional DS3 and frame relay encapsulation.

Check out the following links:

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_module_installation_guide_chapter09186a008010b214.html

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_configuration_guide_chapter09186a008020eced.html

Pls. rate all helpful posts.

HTH,

Sundar

New Member

Re: PA-T3+= and NM-1T3/E3

Thanks sundar

205
Views
0
Helpful
2
Replies
作成コンテンツを作成するには してください