cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
939
Views
5
Helpful
10
Replies

Pass VLAN Traffic on Routers

Hi Gurus,

what possible technology/configuration to do this, pass a vlan traffic from switch to 2 routers, attached files.

Thanks.

10 Replies 10

andrew.prince
Level 10
Level 10

Your post is not clear - explain further what you want to do?

Hi Andrew,

What i mean is from my 6500 switch, i have a vlan100 and i want this vlan to pass thru my GSR and 7206. its like making the router act as a bridge, sort of IRB. I think its not possible to create a vlan encapsulation on 2 routers p2p.

Thanks.

The only way I can think of - is to create dot1q sub-interfaces on the GSR and tag them with vlan 100 - then create a bridge group, and put the sub-interfaces into the bridge group.

Hi Andrew,

i will also create a bridge group on the last router?

gsr--subint-vlan100-----subint-vlan100-7206

Something like this?

Well from your diagram the 7206 does not need to pass layer 2 vlan 100 traffic out another interface?

yes thats the last router and i will just do a routing from there.

OK - then try the suggested topology

Hi Andrew,

I will try the config and try to test.

THanks.

Hi Andrew,

It work well, configured sub-int together with the bride-group without routing. Thanks for your help.

Jeff

np - glad to help

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco