Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

PBR next hop

Hi All,

Can any 1 explain me the below command.

set ip next-hop 115.114.57.241 192.168.5.1

I am using PBR here i need to set the next hop. As per my understanding the next hop specified is 115.114.57.241. Then waht is the second ip address used for.

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

PBR next hop

The second IP address is used if the first is not reachable.

Jon

3 REPLIES
Hall of Fame Super Blue

PBR next hop

The second IP address is used if the first is not reachable.

Jon

New Member

PBR next hop

Thanks Jon..

Re: PBR next hop


Hello

FYI
the second next hop address will NOT be used unless you verify the availably in the PBR route-map

One a match is made in the route-map the router will continue to try and PBR to the first address even if that next hop is unreachable.

The following command validate those next hops.

Route-map xxx
set ip next-hop verify-availability


Please review this

http://www.cisco.com/c/en/us/td/docs/ios/iproute_pi/command/reference/iri_book/iri_pi2.html#wp1012541


Res
Paul




Please don't forget to rate any posts that have been helpful. Thanks.
261
Views
0
Helpful
3
Replies
CreatePlease to create content