Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PCR/SCR values

Hi All,

I need to understand the values for PCR/SCR to be given on the ATM Interface

The topology is Hub end ATM interface ( Bandwidth E3)and Spoke end Frame relay with 1024 bandwidth and 512 CIR.

With Frame Relay value can somebody help me to get the PCR/SCR values.

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

Re: PCR/SCR values

6 REPLIES
Hall of Fame Super Gold

Re: PCR/SCR values

Hi, the problem with mapping FR CIR/BC to ATM SCR/PCR in presence of interworking, is that the ratio changes depending on frame size.

There are entire papers on the subject, lot of calculations, but no easy formula that satisfies all cases.

However, ultimately the values are set by the SP. You've to begin asking them which value they have set, beside you did not mentioned BC for FR.

New Member

Re: PCR/SCR values

Thanks for your reply. The Bc value is 10300 in Frame Relay.

The SP has provided the PCR/SCR value of 1272/636.

I am looking for the formulas to calculate, please share if it is available.

Hall of Fame Super Gold

Re: PCR/SCR values

New Member

Re: PCR/SCR values

Thanks that Document helped a lot

Hall of Fame Super Gold

Re: PCR/SCR values

Thanks for the appreciation and good luck!

New Member

i cant view the document

i cant view the document

3129
Views
5
Helpful
6
Replies