Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

percentage-based shaping IOS 15.2-4.M5

We've upgrade a 7206VXR from Version 12.3(14)T7 IP PLUS Feature Set  to 15.2-4.M5 SP Services.  Since the upgrade we're no longer getting policy maps applied to the Virtual access interfaces.  The policy is applied via a "cisco-avpair="ip:sub-policy-Out=parent" via radius upon the sessions authentication. 


The policy configurtion is as follows

policy-map parent
class class-default
  shape average percent 100
  service-policy child

policy-map child
class policyclass
  bandwidth percent 50
class class-default

class-map match-any policyclass
description match packets dscp marked af21
match access-group name name

 

Any thoughts?

2 REPLIES

Apply the config on virtual

Apply the config on virtual-template.

 

R1#show version | i IOS
Cisco IOS Software, 7200 Software (C7200-ADVIPSERVICESK9-M), Version 15.2(4)M5, RELEASE SOFTWARE (fc2)

 

R1(config)#int virtual-access 1
% Please use virtual template to configure your virtual access

 

-Vishesh

Community Member

Unfortunalty we're using

Unfortunalty we're using Radius as we don't want the Policy applied to all users.  This is a specific requirement for one of our customers.

126
Views
0
Helpful
2
Replies
CreatePlease to create content