Performance Routing option not available in Configuration Professional v2
I'm setting up a Cisco 2901 router and attempting load balancing/link aggregation and/or fail-over for my dual WAN connections. Being new to Cisco's IOS software, I'm using CP to help learn IOS, so right now I'm doing most of my configuration via the Configuration Professionsal GUI. As I understand, the Performance Routing option will help me set this up but I don't have that option available in Configuration Professional; any ideas? I downloaded the most recent version of CP (version 2) I believe; I've reviewed over the often referenced article on this feature at: Cisco Performance Routing and reviewed the Cisco Feature Navigator available at http://www.cisco.com/go/cfn for my IOS release; the feature I'm looking for is documented in a flash presentation at http://www.cisco.com/en/US/docs/net_mgmt/cisco_configuration_professional/scrcst/PfR/CCPPFR.swf (screenshot below):
A summary of the key results of the IOS "show version" command on this router are:
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 30-Sep-09 05:30 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M1, RELEASE SOFTWARE (fc1) BPRouter uptime is 5 days, 23 hours, 43 minutes System returned to ROM by power-on System restarted at 11:34:47 PCTime Wed Dec 23 2009 System image file is "flash0:c2900-universalk9-mz.SPA.150-1.M.bin"
Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.
Processor board ID FTX134981A3
2 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
254464K bytes of ATA System CompactFlash 0 (Read/Write)
Device# PID SN
*0 CISCO2901/K9 FTX134981A3
Technology Package License Information for Module:'c2900'
Re: Performance Routing option not available in Configuration Pr
Thanks; I believe I understand what you're talking about regarding the IOS GUIs; I've taken the plnuge to learn the CLI though I do use the GUI to help; this router is so far taking the longest of any I've ever set up. though it is the most sophisticated.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...