Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Performance Solution

Hello,

I have a Server with Two NIC.

One of the NIC of the Server is connected to 4500 Ethernet Module.

To improve the performance of the Server I would like connect the second NIC.

What is the best possible solution/configuration?

2 REPLIES

Re: Performance Solution

Friend,

You can configure etherchannel between the server and the switch by connecting another cable between the two.

http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a008014edfa.shtml

you can also configure teaming with the 2 NICs

http://h18006.www1.hp.com/products/servers/management/rdp/knowledgebase/00000108.html

HTH, rate if it does

Narayan

New Member

Re: Performance Solution

Thanks.

Using Etherchannel option what configuration is required on the Server Two nic.

Will there be Two IP address assigned on the server. { One IP for each interface }

some of my applications are hardcoded IP address.

88
Views
4
Helpful
2
Replies