I have seen installs with VWIC-1MFT-T1 cards used to terminate Frame connections. Aside from price, is there any reason to recommend a WIC-1DSU vs. a VWIC-1MFT? Is the VWIC-1MFT always a viable alternative to the WIC-1DSU?
? N x 64 kbps or N x 56 kbps nonchannelized data rates (N = 1 to 24)
? Standards-based, including ANSI T1.403 and AT&T Publication 62411
? Full management features:
?Configuration-Capability for remote configuration via Telnet from Cisco IOS CLI.
?Monitoring-Router and DSU/CSU are manageable as a single SNMP entity; extensive DSU/CSU statistics are provided by the Cisco IOS CLI.
?Troubleshooting-Extensive loopbacks (including manual button for network line loopback), bit error rate tester (BERT) test patterns, alarm counters, and performance reports, all of which are accessible from Cisco IOS CLI. LEDs for carrier detect, loopback, and alarm functions
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...