Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIM over Frame-relay

I cannot get PIM to establish neighborship over Frame-relay in p-t-mp network. What is necessary to get it working? "ip pim nbma-mode" interface command does not seem to help.

interface Serial6/7:0.2 multipoint

ip address 10.0.1.129 255.255.255.128

ip pim nbma-mode

ip pim sparse-mode

ip ospf network broadcast

ip ospf priority 50

ntp broadcast

frame-relay interface-dlci 144

frame-relay interface-dlci 145

R1#sh ip pim interface

Address Interface Ver/ Nbr Query DR DR

Mode Count Intvl Prior

10.0.1.129 Serial6/7:0.2 v2/S 0 30 1 10.0.1.129

1 REPLY
New Member

Re: PIM over Frame-relay

I tried all kinds of things (like disabling InARP and introducing static DLCI-IP mapping) and at some point PIM started to work over the FR cloud. I then tried to revert the configuration to the original (non-working) state, but PIM still works. I have no idea what was different.

286
Views
0
Helpful
1
Replies