Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

ping problem

scenario:

vlans(Main)--router(Main)--15 branches(frame-relay)

Findings;

1. all of the branches except that of branch 15 are working fine.

2. branch 15 is having 2 vlans (A and B). Vlan A could ping a server in Main whereas a machine in Vlan B will only have a successful reply after more than a minute of pinging. Everything will be fine after the successful ping. This is happenning every morning or after a night long idle.

any idea/help is appreciated.

thanks

3 REPLIES
Silver

Re: ping problem

What switch are you using in the 15th branch? Could you post your config. At the face of it you might have a default gateway configured on your switch. If possible enable ip route and check.

Hoogen

New Member

Re: ping problem

def gateway is there pointing to the router..the switch is a layer 3 3com.

Silver

Re: ping problem

Are you using something similar to a static route pointing to the router or given a default-gateway statement.

Use a static default route. It might help out.

Hoogen

101
Views
0
Helpful
3
Replies
CreatePlease to create content