Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PIX SNMP configs

Dear All,

i need some help on enabling cisco PIX snmp. I have use the following commands but nothing is working :

snmp-server host outside x.x.x.x

snmp-server host inside x.x.x.x

no snmp-server location

no snmp-server contact

snmp-server community private

snmp-server enable traps

kindly assist.

Thanks,

Elias

1 REPLY

Re: PIX SNMP configs

Hi Elias ,

Kindly check on inside interface first with following commands & then check for outside interface.

snmp-server enable

snmp-server host inside 192.168.3.2

snmp-server community key

snmp-server enable traps all

Also addd

logging enable

The default configuration has all snmp traps enabled.

HTH..rate if helpful..

106
Views
0
Helpful
1
Replies
CreatePlease to create content