Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PIX VPN Inside HIDE NAT

Hello,

Just wondering if its possible to hide all inbound traffic over a Cisco PIX VPN to the inside interface?

So the LAN behind the PIX is 192.168.0.x, the inside interface is 192.168.0.253, all traffic that is destin for host on the 192.168.0.x LAN to come from the 192.168.0.253.

Any help would be much appreciated, I know you can do this on checkpoint, but this aint a checkpoint box :-)

Kind Regards

Steven

1 REPLY
Silver

Re: PIX VPN Inside HIDE NAT

With the help of ACL you can hide the inbound or outbound traffic . Go through the following documents it will help you to configure access-list Commands and Port Redirection(Forwarding) on PIX.

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a0080094aad.shtml

134
Views
0
Helpful
1
Replies