Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

PoE

Hi,

i have 3750 switch .can anybody tell me how to check whether it supports POE or not.

MOdel No:: WS-C3750G-48TS-S

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: PoE

show power-inline

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12240se/cr/cli2.htm#wp8729716

If you have a PoE switch, it will list all the ports with the allocated power. If you don't have a PoE switch, the command will return with no output.

4 REPLIES

Re: PoE

Community Member

Re: PoE

Thanks for your reply.

Is there any command for the same or we have to rely on the data sheets only.

Hall of Fame Super Bronze

Re: PoE

show power-inline

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12240se/cr/cli2.htm#wp8729716

If you have a PoE switch, it will list all the ports with the allocated power. If you don't have a PoE switch, the command will return with no output.

Re: PoE

In addition to Edisons post, the POE switch models are marked with letter P (for POE)

for eg. WS-C3750G-48PS-S

HTH

Narayan

236
Views
3
Helpful
4
Replies
CreatePlease to create content