Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

Point to multipoint is OSPF

how to configure the point to multipoint and point to point . Please some example to understand.

1 REPLY
Silver

Re: Point to multipoint is OSPF

Hi anthony,

U can configure point to multipoint and point to point by using,

ip ospf network point-to-multipoint

ip ospf network point-to-point

commands,

there are plenthy of links to provide config examples,

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9ea.shtml

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00801ec9e1.shtml

http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a0080094057.shtml

Rgs,

194
Views
5
Helpful
1
Replies
CreatePlease to create content