Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Point to point connection using E1 network

Dear Sirs,

I want to connect 2 cisco 1721 router together through E1 network ( LAN 2 LAN ).

What is the interface cards which I need to install in the 1721 routers to connect the RJ45 E1 links ( need part #).

Thanking you for your help.

Regards.

muneer@yemen.net.ye

3 REPLIES
New Member

Re: Point to point connection using E1 network

not sure what you are trying to achieve this is end of life model

you can use VWIC-1MFT-T1/E1 or VWIC2-1MFT-T1/E1

Hall of Fame Super Gold

Re: Point to point connection using E1 network

you can use VWIC-1MFT-T1/E1 or VWIC2-1MFT-T1/E1

I'm not sure VWIC-1MFT-T1/E1 or VWIC2-1MFT-T1/E1 will work.

Cisco One and Two Port T1/E1 Multiflex Voice/WAN Interface Card

http://www.cisco.com/en/US/prod/collateral/routers/ps274/product_data_sheet09186a0080091b9c_ps282_Products_Data_Sheet.html

Silver

Re: Point to point connection using E1 network

Here is the link you need for this device:

http://www.cisco.com/en/US/partner/products/hw/routers/ps221/products_data_sheet09186a00800920ec.html

The card according to this data sheet is:

WIC-1T

One-port serial, asynchronous and synchronous (T1/E1)

or

VWIC-1MFT-E1

1-Port RJ-48 Multiflex Trunk - E1

http://www.cisco.com/en/US/partner/products/hw/routers/ps274/products_tech_note09186a00800b6e0f.shtml#platform

This link also provides the required IOS

209
Views
0
Helpful
3
Replies
CreatePlease to create content