Need help please. Have a PPP on two 2800 routers that has been working for couple of months now. One subnet is 172.15.x and the other is 192.168.2.x , I can ping all devices on both sides as long as they are on VLAN1 but I try other VLANS , ping fails. Mainsite has 5 VLANS configured and I like to get to those. I hope I have provided enough information
Are you using a routing protocol between the two routers; if not, are you using static routes? Are the networks/VLANs being advertised between the two routers? Are subinterfaces setup on the mainsite router for the five VLANs?
I would say 3750 switch needs bunch of static routes - one for each VLAN with def gw poining to the 2800 box. Then in the 2800 box same thing, unless you use some routing proto. Then none of this will be required and thigns will work automatically
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.