Currently i am having an issue where it seems like my Policing is not working correctly. I am using this on a input policy from My LAN to My WAN. What happens is the servers that match that ACL are only allow a certain about of bandwidth to push out updates to our remote sites but when they do push it bring those remotes site to a crawl. So is the policing total amout per interface or per flow ? ANy aisstance you could provide would be most helpful.
class-map match-all WINUP match access-group 157
policy-map MARK-APPS class VOICE-TRAFFIC set ip dscp ef class MISSION-CRITICAL-TRAFFIC set ip dscp af31 class CALL-SIGNALING-TRAFFIC set ip dscp cs3 class ROUTING-TRAFFIC set ip dscp cs6 class TRANSACTIONAL-DATA-TRAFFIC set ip dscp af32 class WINUP police cir 750000 conform-action transmit exceed-action drop class BULK-DATA-TRAFFIC set ip dscp af21 class NETWORK-MANAGEMENT-TRAFFIC set ip dscp af22 class Interactive-Video-Traffic set ip dscp af41
sh policy-map MARK-APPS Policy Map MARK-APPS Class VOICE-TRAFFIC set ip dscp ef Class MISSION-CRITICAL-TRAFFIC set ip dscp af31 Class CALL-SIGNALING-TRAFFIC set ip dscp cs3 Class ROUTING-TRAFFIC set ip dscp cs6 Class TRANSACTIONAL-DATA-TRAFFIC set ip dscp af32 Class WINUP police cir 750000 bc 23437 conform-action transmit exceed-action drop Class BULK-DATA-TRAFFIC set ip dscp af21 Class NETWORK-MANAGEMENT-TRAFFIC set ip dscp af22 Class Interactive-Video-Traffic set ip dscp af41
interface GigabitEthernet0/2 ip accounting output-packets load-interval 30 delay 100000 duplex full speed 1000 media-type rj45 no negotiation auto service-policy input MARK-APPS
i didnt want to do per flow just wondering why we had a policer on that interface and it doesnt seem to be working right ...casue when those servers start a push they kill some of out remote sites the ACL its maps to is an Extended IP host ACL so it should cover all ports.it is also placed high in the policy
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.