Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Policy Based Routing on ASR1006

I have run PRB on multiple Cisco router 2800, 3800, 6500 etc. We use it for redircting to a WAN Accelerator. We setup the ASR the same as all our other with a route-map and an match criteria of an ACL and added the "ip policy route-map" statement to the LAN side interface, no traffic is hitting the ACL, upgraded to the latest software on the ASR 12.2(33)XNB2. I ahve also tried using WCCP with similar ACL's will not work either. Has anyone come across this issue?

Thanks Tom

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Policy Based Routing on ASR1006

Hi,

ACL counting when used for PBR is not supported on the ASR. But the PBR feature is working and supported starting XNB

HTH

Laurent.

2 REPLIES
Cisco Employee

Re: Policy Based Routing on ASR1006

Hi,

ACL counting when used for PBR is not supported on the ASR. But the PBR feature is working and supported starting XNB

HTH

Laurent.

New Member

Re: Policy Based Routing on ASR1006

Thanks for the answer!

278
Views
0
Helpful
2
Replies