Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

[policy map on POS interface (GSR)]

hi,

i tried applying the following configuracion on a POS interface in a GSR:

class-map match-any Internet_All

match access-group 21

!

access-list 21 permit any

!

policy-map Internet_Mark_In

class Internet_All

set ip dscp 0

but i got the follwing:

Router#conf t

Enter configuration commands, one per line. End with CNTL/Z.

Router(config)#int pos1/1

Router(config-if)#servi input Internet_Mark_In

%Classmap 'Internet_All' not supported on interface POS1/1

Router(config-if)#

anybody know why this can happen?

please advice!

thanks in advance,

c.

1 REPLY
Bronze

Re: [policy map on POS interface (GSR)]

If you do not have policing configured in the policy-map that is applied on the POS interface then the only counters you would see are for the default class as we can see it's the case from the outputs you attached. Also try this command sh int pos [/] | i (output queue)

242
Views
0
Helpful
1
Replies
CreatePlease login to create content