Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Policy Route Map

Hi,

Anyone knows what is the policy route map below means..I am confused..

Thanks in advanced!

----------------------------------------

interface FastEthernet0/0.1

encapsulation dot1Q 1 native

ip address 122.1.x.x.255.255.0

no ip redirects

ip accounting access-violations

ip policy route-map ID

!

ip access-list extended ID

permit ip host 122.1.8.3 any

6 REPLIES

Re: Policy Route Map

Hi,

Can you please post the route-map named "ID".

BR,

Mohammed Mahmoud.

Community Member

Re: Policy Route Map

Hi Mahmoud,

As below:

route-map ID permit 10

match ip address I/D

and sorry...ip access-list extended I/D should be the right one..

Thanks,

Re: Policy Route Map

Hi Cindy,

Since the route-map doesn't has any set entry, thus it won't do anything, normal routing using the routing table shall be done.

HTH,

Mohammed Mahmoud.

Community Member

Re: Policy Route Map

H Mahmoud,

How can we know there there is no set entry and also what is the number of 10 represents?

DO you have any example on this route-map ?

Thanks in advanced again!

Hall of Fame Super Blue

Re: Policy Route Map

Hi Cindy

If what you posted was the full output of the route-map then we know there is no set part to it. This basically means you can match as much as you like but nothing will be done.

You only have one entry but if you wanted another entry to your route-map you could another number eg.

route-map ID 20

etc...

The packet will be checked against each entry in your route-map until it finds a match.

HTH

Jon

Re: Policy Route Map

Hi Cindy,

I guess Jon has given a nice explaination, here you are some details about PBR and using route-maps:

Policy-Based Routing

http://www.cisco.com/warp/public/732/Tech/plicy_wp.htm

Configuring Policy-Based Routing

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_c/fqcprt1/qcfpbr.htm

HTH,

Mohammed Mahmoud.

240
Views
0
Helpful
6
Replies
CreatePlease to create content