I have a customer whom is using a Router on a Stick ( 4232 - L3 blade) to route between their production VLAN's. The router on a stick has two externally facing Gateways that he has default route statements in place for that he load balances to for Internet Access.
I have prepared a Public translation for a Web Server that resides on one of the production VLAN's that will occur across only one of the two external gateways; so I need for the core router to always send the traffic for this Web Server to the specific gateway vs. load balancing between the two.
It actually makes sense that it would allow you to configure the route map but not allow you to use it (apply it) in Policy Based Routing. Route maps are used for many things besides Policy Based Routing: it can be used to control redistribution between routing protocols, can be used in BGP to help control neighbor relationships. So the code allows you to configure the route map because it is probably a legitimate function in something that is supported in that code. But if Policy Based Routing is not supported in that code then it will not allow you to assign/apply the route map on the interface.
this is a great idea; I had already created a VLAN (VLAN 6 192.168.6.0/24; subinterface IP add is 192.168.6.1) only for the Web Box. But by creating that VLAN, I am mandated to configure the Gateway of the VLAN on the 4232 router. I cant configure it with the Gateway of the Edge router because it is in a different subnet...
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...