I have two 3640's using a point to point 2xT1 link but when I attempt to ftp a file to and from the max throughput I get is ~1Mbps. The routers are running IOS 13.3(13). On one side the 3640 connects to a 6513 core switch and on the other to a 3550 switch and then 2900's. I can provide any configs to be looked at. I don't know really where to start to see about improving the performance of this link. No IPSec, using EIGRP, no errors on the serial interfaces....
There's lots of things that can impact actual host to host FTP, so you might want to obtain some type of end-to-end test traffic generator. There are simple free ones that would support basic TCP and/or UDP bandwidth tests. Using such, bypasses some host issues, like disk performance and quality of FTP application. Try something like that and post if there's still appears to be an issue.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.