Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

port mirroring on cisco 3845 router

please i want to mirror fron int g0/0 to fa4/8 on the router.pls i need the config to setup this.i need help

9 REPLIES

Re: port mirroring on cisco 3845 router

As i understand you have a router with G0/0 interface connecting to a switch on port 4/8

Choose a spare port on the switch which will act as the destination port (say 4 /12)

monitor session 1 source interface 4/8

monitor session 1 destination interface 4/12

http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015c612.shtml

Narayan

New Member

Re: port mirroring on cisco 3845 router

monitor session 1 destination interface fastethernet 4/8

monitor session 1 source interface gigabitethernet0/0 .

but the router is not taking the last command.am mirroring from the ge0/0 interface to fa4/8 on a thesame router 3845.i mean mirroring on thesame router

Re: port mirroring on cisco 3845 router

Ah... so you have a switch module on the router

i dont think it is poosible to mirror the router fe ports to a switch module connected to the same router..

Narayan

New Member

Re: port mirroring on cisco 3845 router

is it possible to mirror the router Ge port to a Fastethernet switch module connected to the same router 3845

Hall of Fame Super Silver

Re: port mirroring on cisco 3845 router

Olakunle

Perhaps I am not understanding something in your request. But port monitoring is a function done on a switch and not on a router. Does this router have a switch module installed as one of its cards?

Perhaps you can supply some additional detail about the router and about what you are trying to do, so that we can understand better and be able to give you better answers.

HTH

Rick

New Member

Re: port mirroring on cisco 3845 router

i have a 16PORT-WIC installed on the router 3845 and i want to mirror from the gigabit interface 0/0 to the one of the ports on the WIC.

i could issue.

monitor session 1 destination source interface fa0/0.

but IOS is not allowing.

monitor session 1 source source interface ge0/0

i dont know why,is this not possible

Bronze

Re: port mirroring on cisco 3845 router

I think that you only can mirror the ports on the 16 ports wic module.

Hall of Fame Super Silver

Re: port mirroring on cisco 3845 router

Olakunle

I do not believe that it is possible to mirror from a Gig interface of the router to a switch port on the switch module in the router. That is why the router does not accept the second command.

HTH

Rick

New Member

port mirroring on cisco 3845 router

Hey everyone,

Another scenario: i have a 16PORT-WIC installed on the router 3845 and i want to mirror from the  interface f1/5 (WIC) to the one of the ports on the WIC (f1/6).

Thanks in advance

Laur

4105
Views
0
Helpful
9
Replies