Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Port restart delay on PA-8E1/120

i have PA-8E1/120 installed on my local and remote router (7206), whenever there is a fiber switchover (which only takes 55 ms on WAN side) the E1 controllers on both router takes 1000 ms to comeup.

Actually its badly effecting the service as the default application timer is set to 500 ms and I want E1 controllers to comeup is less than 500 ms.

Is there any way that I can fine tune the E1 controllers restart delay timer .... ?

3 REPLIES
Hall of Fame Super Gold

Re: Port restart delay on PA-8E1/120

No, there is no way.

New Member

Re: Port restart delay on PA-8E1/120

thanks for the reply, can u refer some document addressing the same issue?

Hall of Fame Super Gold

Re: Port restart delay on PA-8E1/120

There are no documents about.

If you need sub-second switchover, bring the fiber directly to the router.

264
Views
0
Helpful
3
Replies