I have a Cisco 815 router missing a power supply, I have searched around looking for what power supply works with it without success. Does anyone know which power supply (part number) will work with the 815?
Are you sure? The PWR-800-WW1 appears to have 8 pins on it whereas the Cisco 815 only has 6 pins on the power connector. Out of all of the 800 series power supplies I've seen on Cisco's site, none of them list the 815 as compatible.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...