Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

PPOE thru 1760 with ADSL WIC

Good evening I am new agian to cisco as I am just getting back into routers and I am at a loss here and hope someone can help. I have a cisco 1760 with a ADSL wic that I need to setup to allow pppoe bridging. I need to connect a computer to the fastethernet0 and have it establish the pppoe connection so that the external IP shows on the internal interface. I have tried the following config to no luck and at a stand still please reply with any suggestions

------Cisco 1760 Config ----------------------------

service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname smadsl
no ip routing
interface ATM0/0
no ip address
atm vc-per-vp 256
pvc 8/35
encapsulation aal5snap
dsl operating-mode auto
bridge-group 1
interface FastEthernet0/0
no ip address
speed auto
bridge-group 1
ip classless
no ip http server
bridge 1 protocol ieee
line con 0
transport input none
line aux 0
line vty 0 4

Thanks for any help you can provide