Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

PPP between to sites

Hi all, at first my expiiance with routers configuration is minimal so I'd like to ask if someone can provide example for PPP configuration using 2 2801 with 2 VWIC-2MFT-T1= both T1s should be tied togather for 3Mbps ideally configuration should reflect QoS for voice, hopr this explains what I'm trying to do

TIA

1 REPLY
Silver

Re: PPP between to sites

First of all, you will configure multi-function in the routers, so there should be no single example can include all. Please check below link for different features.

MLPPP to tie up the bandwidth :

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a00804a40f9.html

QoS for voice, you have to check those links in this URL that tell you the operation and examples :

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800bd9ec.html

You can also seach lots of information from Cisco web easily.

Hope this helps.

94
Views
0
Helpful
1
Replies
CreatePlease to create content