Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ppp multilink problems

Hi,

I describe my scenario:

3660 <----> 7206VXR <-----> 2691

From 3660 to 7206 I have a ATM link in which there is PPP multilink activate with ip address.

From 2691 to 7206 I have a frame relay link with PPP multilink activate.

From 3660 to 2691 there isn't authentication CHAP or PAP or tunnelling.

In these links there is EIGRP enabled.

Now, I discovered that between 3660 and 2691 there is "service=ppp" activated and by EIGRP the 3660 learns route through the 7206 interface directly linked to 2691.

When I disable ip unnumbered ATM3/0 on virtual-template interface the routing came back normal and the virtual interface "service=ppp" is getting "protocol=lcp".

After a C2691 interface shutdown the 7206 has reloaded and the situation has returned normal.

Why ?

There are any bugs on 7206?

The IOS release is 12.2(12b).

Thank you.

Regards.

Paolo

1 REPLY
Silver

Re: ppp multilink problems

Check whether the issue with 7206VXR by replacing with another one and test it with same scenerio.

248
Views
0
Helpful
1
Replies
CreatePlease login to create content