Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

ppp multilink

I'm getting ready to set up a new ppp multilink between two of our offices. To conserve space in the routers, we'll be installing new VWIC-2MFT-T1's into our 2651XM routers running 12.2 IOS. I've also noticed, that one of the new interfaces is actually a VWIC-2MFT-T1-DI.

Is the 'channel-group channel-number timeslots range/all [speed {64/56}]' command still available with this VWIC, or will I have to use the tdm-group command instead? Also, will there be any issues with a drop-insert VWIC on one end and a non-drop-insert VWIC on the other?

New Member

Re: ppp multilink

the "channel-group 0 timeslots 1-24 speed 64" is available on the DI - im running one right now with the channel group config.

i dont think there will be any issue having a DI on one end and a non DI on the other. currently i have a DI on one end then a WIC-1DSU-T1-V2 on the other. i have never used VWIC-2MFT-T1 on both ends but i think some people do.

Re: ppp multilink

Hi Michael,

It will help you.Kindly rate it ,